Silver Solder Welding Rod Flux Coated - Approx 1.5mm x 500mm Long

Silver Solder w/Flux - 45% Silver - 1.5mm Diam - KS1345-S
Because of the relatively low melting point of this silver braze, the model builder in the field of technical model building is almost exclusively concerned. The working temperature of this hard solder is 630 ° C. The silver as an alloying component in the solder does not only reduce the working temperature, but also improves the flow properties. Furthermore, silver has the positive property of combining well with other metals. For brazing brass and steel, silver solder flux is essential. The low working temperature of the silver solder bars allows the thermal load to be as low as possible for the processed material. It is important not to heat the workpieces too much, especially in the case of brass. In combination with our silver solder flux you achieve with these silver solder always optimal results.

For fine soldering as it often happens in technical model construction we recommend the 1mm rods. The 1mm silver braided bars are easy to carry with the hand and can be easily melted with small burners. For larger parts we prefer the 1.5 mm silver solder bars. With these rods you get faster material to the soldering point if needed.

What can be brazed?
The following materials can be combined with silver solder: brass, copper, gunmetal, gray cast iron, rusting steels and stainless steel. A combination of the materials among each other is easily possible with this silver braze solder. If the material is not known to you, it is always recommended to solder a piece to the sample beforehand. This allows you to determine whether the materials can be combined with the silver braze.

Please Note: This is for one length only

Exhaust Canisters & Manifolds

Secraft Silencer Holder (Large 75 ~ 85mm) SEC055

Secraft Silencer Holder (Medium 65-75mm) SEC054

Secraft Silencer Holder (Small 50~60mm) SEC053

MTW AS2 Teflon Tube & Clamp Contact Set for 25mm Inlet Exhausts

Silver Solder Welding Rod Flux Coated - Approx 1.5mm x 500mm Long

Teflon Adaptor 22-25mm (MTWTR1)

MTW - Muffler Set For Pilot-RC DLE61 With TD80 Canister