🎉 Up to 70% Off Selected ItemsShop Sale
$26.84
UniLight 9mm Pro Navigation Light, 2.5Wx2, Short - Red—
$26.84
The Story
UniLight 9mm Pro Navigation Light, 2.5Wx2, Short - Red PRO9X-025x2-RT
The compact version of the 9mm navigation light!
Angled construction for the best radiation in all sectors. Short design to also find space in areas with a small installation depth, for example as a position light for air inlets.
Electricity: 2.5Wx2 reference power, 8(12)V,0.2A
Beam angle: 0 to 180°
Light intensity: ~50 Lumen RED
Light intensity: ~100 Lumen GREEN
Light intensity: ~200 Lumen WHITE
Dimension: 9.5x32x18mm
Weight: 4g (without cable)
Beam angle: 0 to 180°
Light intensity: ~50 Lumen RED
Light intensity: ~100 Lumen GREEN
Light intensity: ~200 Lumen WHITE
Dimension: 9.5x32x18mm
Weight: 4g (without cable)
With 1m silicone connection cable, already mounted with high quality polycarbonate cap
The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S LiPo and is dependent on bulbs, operating mode and technology.
The luminaire is ready to use for operation with 2S LiPo (ca. 8V). With 3S (12V), the enclosed resistor has to be added. Please note that high-performance LEDs can get very hot, up to 70°C is quite normal. These lamps with heatsink cases are suitable for continuous operation if an air flow (during flight) is possible. If this is not the case, the duty cycle of 5-10 minutes should not be exceeded. Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.
Note: The LED lights are extremely bright! Never look directly into a LED!
The luminaire is ready to use for operation with 2S LiPo (ca. 8V). With 3S (12V), the enclosed resistor has to be added. Please note that high-performance LEDs can get very hot, up to 70°C is quite normal. These lamps with heatsink cases are suitable for continuous operation if an air flow (during flight) is possible. If this is not the case, the duty cycle of 5-10 minutes should not be exceeded. Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.
Note: The LED lights are extremely bright! Never look directly into a LED!
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Description
UniLight 9mm Pro Navigation Light, 2.5Wx2, Short - Red PRO9X-025x2-RT
The compact version of the 9mm navigation light!
Angled construction for the best radiation in all sectors. Short design to also find space in areas with a small installation depth, for example as a position light for air inlets.
Electricity: 2.5Wx2 reference power, 8(12)V,0.2A
Beam angle: 0 to 180°
Light intensity: ~50 Lumen RED
Light intensity: ~100 Lumen GREEN
Light intensity: ~200 Lumen WHITE
Dimension: 9.5x32x18mm
Weight: 4g (without cable)
Beam angle: 0 to 180°
Light intensity: ~50 Lumen RED
Light intensity: ~100 Lumen GREEN
Light intensity: ~200 Lumen WHITE
Dimension: 9.5x32x18mm
Weight: 4g (without cable)
With 1m silicone connection cable, already mounted with high quality polycarbonate cap
The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S LiPo and is dependent on bulbs, operating mode and technology.
The luminaire is ready to use for operation with 2S LiPo (ca. 8V). With 3S (12V), the enclosed resistor has to be added. Please note that high-performance LEDs can get very hot, up to 70°C is quite normal. These lamps with heatsink cases are suitable for continuous operation if an air flow (during flight) is possible. If this is not the case, the duty cycle of 5-10 minutes should not be exceeded. Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.
Note: The LED lights are extremely bright! Never look directly into a LED!
The luminaire is ready to use for operation with 2S LiPo (ca. 8V). With 3S (12V), the enclosed resistor has to be added. Please note that high-performance LEDs can get very hot, up to 70°C is quite normal. These lamps with heatsink cases are suitable for continuous operation if an air flow (during flight) is possible. If this is not the case, the duty cycle of 5-10 minutes should not be exceeded. Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.
Note: The LED lights are extremely bright! Never look directly into a LED!
