The Story
UniLight 5mm HIGH DEFF LED White POINT-003-WE
These small LEDs have an enormous light output with a relatively wide beam angle, representing one of the highest technical performance available for these types of LEDs. The light barely heats up, requires only a few milliamperes of current, and is ideal for use in small models such as helicopters and Styrofoam models (up to approx. 1 meter) as well as for night flying.
Performance: 0.3W reference power
Voltage: 8V/12V, 0.03A
Beam angle: ~25°
Light intensity: 23000mcd, ca. 3 Lumen RED
Light intensity: 21000mcd, ca. 3 Lumen GREEN
Dimensions: 5x10mm
Weight: 2g (without cable)
| Operating Voltage: 2S/8V or 3S/12V with additional resistor |
| Cable Length: 0.5m PTFE 0,14mm² |
| Dimensions: 5mm |
| Design: Round |
Ideal for use in small models such as helicopters and Styrofoam models (up to approx. 1 meter) as well as for night flying.
Equipped with 0.5m teflon cable and pre-configured resistor for 8V/12V
Please note that high-performance LEDs can become very warm, up to 70°C is completely normal. These heat sink mounted lights are suitable for continuous operation when air convection is possible. After installation, check the operating temperatures. We cannot guarantee against overheating.
Warning: The LED lights are extremely bright! Never look directly into an LED!
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Description
UniLight 5mm HIGH DEFF LED White POINT-003-WE
These small LEDs have an enormous light output with a relatively wide beam angle, representing one of the highest technical performance available for these types of LEDs. The light barely heats up, requires only a few milliamperes of current, and is ideal for use in small models such as helicopters and Styrofoam models (up to approx. 1 meter) as well as for night flying.
Performance: 0.3W reference power
Voltage: 8V/12V, 0.03A
Beam angle: ~25°
Light intensity: 23000mcd, ca. 3 Lumen RED
Light intensity: 21000mcd, ca. 3 Lumen GREEN
Dimensions: 5x10mm
Weight: 2g (without cable)
| Operating Voltage: 2S/8V or 3S/12V with additional resistor |
| Cable Length: 0.5m PTFE 0,14mm² |
| Dimensions: 5mm |
| Design: Round |
Ideal for use in small models such as helicopters and Styrofoam models (up to approx. 1 meter) as well as for night flying.
Equipped with 0.5m teflon cable and pre-configured resistor for 8V/12V
Please note that high-performance LEDs can become very warm, up to 70°C is completely normal. These heat sink mounted lights are suitable for continuous operation when air convection is possible. After installation, check the operating temperatures. We cannot guarantee against overheating.
Warning: The LED lights are extremely bright! Never look directly into an LED!
